Goedkoper Bij

Check information on the box or consult your dealer if you are not sure.Kijk hier voor de handleiding.

transmitting power +6dBm Range up to 50m outdoors up to 40m indoors (depending on terrain and building structure) Dimensions (Height x Width x Depth) 86 x 86 x 51 mm Compliance with EU directives RoHS 2011/65/EU RED 2014/53/EU Radio frequency of individual device must be same as your Z-Wave controller. FIBARO - Walli DimmerFIBARO Walli Dimmer is een slimme wanddimmer die is ontworpen om de lichtbron via het de Z-Wave controller te regelen maar ook locaal op de dimmer zelf.Het meet het actieve vermogen en de energie die wordt verbruikt door de gecontroleerde belasting.Te gebruiken in een zwave controller zoals: Fibaro HC2, Fibaro HCL en Domoticz. Specifications Power supply 110-230V~ 50/60 Hz Compatible load types Resistive loads Conventional incandescent and halogen light sources Resistive-capacitive loads Fluorescent tube lamp (compact / with electronic ballast), electronic transformer, LED Resistive-inductive loads Ferromagnetic transformers Rated load current 0.22A-1.52A – resistive loads (incandescent and halogen) 0.22A-1.3A – resistive-capacitive loads (fluorescent tube lamp, electronic transformer, LED) 0.22A-1.3A – resistive-inductive loads (ferromagnetic transformers) 0.022A-0.22A – with Bypass 2: fluorescent tube lamp or LED Active element semiconductor electronic switch ε Recommended external overcurrent protection 10A type B circuit breaker (EU) 13A type B circuit breaker (Sweden) For installation in boxes Ø = 60mm, depth ≥ 40mm Recommended wires cross-section area between 1.5-4.0mm2, stripped 12-12.5mm of insulation Operating temperature 0–35°C Ambient humidity 10–95% RH without condensation Radio protocol Z-Wave (500 series chip) Radio frequency band 868.0–868.6MHz; 869.7–870.0MHz Max.

Eigenschappen